How to Make PVC Pipe Lamp with Your Own Hands


This article explains how a lighting project. The finished product is a lamp made of PVC pipe lamp with RGB backlight and a Bluetooth speaker.

Part 1

 on How to Make PVC Pipe Lamp with Your Own Hands

1
Make sure that the tray is clean

 on How to Make PVC Pipe Lamp with Your Own Hands

2
It should perfect fits to PVС flange

 on How to Make PVC Pipe Lamp with Your Own Hands

3
Cut a circle for the light bulb socket.

 on How to Make PVC Pipe Lamp with Your Own Hands

4
Insert the circle into the PVC flange. Then insert the socket for the bulb.

 on How to Make PVC Pipe Lamp with Your Own Hands

5
it includes: Cord set, switch, Push-through socket and socket shell. These can be found at most hardware stores. Note that it's possible to purchase the pieces separately, but buying them together will ensure a better fit.

 on How to Make PVC Pipe Lamp with Your Own Hands

6
Insert the socket into the hole that was cut in the tray. tighten the nut in place.

 on How to Make PVC Pipe Lamp with Your Own Hands

7
Glue the outer and inner perimeter of the tray.

 on How to Make PVC Pipe Lamp with Your Own Hands

8
Insert the bulb and check whether it works or not. Purchase a new socket switch from a hardware store. Your new switch can be whatever type you prefer, regardless of the existing switch.

 on How to Make PVC Pipe Lamp with Your Own Hands

9
Connect the PVC pipe and the base of the lamp.

 on How to Make PVC Pipe Lamp with Your Own Hands

10
Take the duct tape. Drawing can be anything you want. first, make a circle at the base. Cut off pieces of duct tape and glue them so that you have obtained triangles. Don't make the triangles too small. They're much harder to cut..

 on How to Make PVC Pipe Lamp with Your Own Hands

11
Cut out the white triangles. Will be very dusty! Protect your eyes and try to cover your mouth with a scarf.

 on How to Make PVC Pipe Lamp with Your Own Hands

12
They do not heat the PVC pipe when sawing. And you can choose the size of the disk convenient for you. It is more convenient to cut a large disk.

 on How to Make PVC Pipe Lamp with Your Own Hands

13
You need to process the edges with sandpaper. Everything is ready and can be put together

 on How to Make PVC Pipe Lamp with Your Own Hands

14
Its diameter is 95mm. It is great for d100mm pipe. The lamp does not heat up and it will not damage the PVC pipe.